Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8559862
- Product Categories
- Friendly Links
Information Name: | Supply of polymer waterproof mortar |
Published: | 2012-03-08 |
Validity: | 30 |
Specifications: | 20KG / barrel |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | EC2000 polymer waterproof Anti-corrosion mortar Scope of application ◆ The product can be used for high-level, multi-layered, high-level outside the building walls, kitchen, bathroom, balcony level, window surrounding, wear the pipe wall, the ground, ports, docks, roads, bridges, ponds, cooling towers and civil construction required mortar waterproofing works. ◆ The product can be used for building exterior walls, basements, indoor bathroom, balcony waterproof, anti-leakage, moisture engineering and paste the indoor and outdoor decoration materials. Particularly suitable for acid, alkali, salt corrosion or flexible requirements of the occasion to use. ◆ The product can be used for kitchen, bathroom, balcony, courtyard or trench water, swimming pool or reservoir of water, laying of concrete surface before the moisture in the wood processing, and bridge deck waterproofing underground concrete surface anti-corrosion, anti-salt solution layer of protection. Features ◆ excellent weather resistance, abrasion resistance and water resistance, non-toxic harmless, can be used for drinking water projects. ◆ strong base bonding surface of the concrete, mortar, stone, wood, polystyrene board, glass, metal, etc. and has a certain degree of flexibility. ◆ on the concrete surface to form a solid coating on the concrete surface to play the role of reinforcing the protection and waterproof. And protective properties of reinforced, and corroded reinforcement can play a protective patch performance and good durability. ◆ in damp grass roots and the moist environment under construction operating convenience Province, we work under the corrosive environment of medium-intensity gas can substitute for organic coatings, and compared with the resin material of construction is simple, inexpensive. Technical performance Serial number of project performance indicators A condensation of the initial set of time / min ≥ 45 The final setting / h ≤ 24 2 impermeability pressure / Mpa 7d ≥ 1.0 28d ≥ 1.5 3 Compressive strength / Mpa 28d ≥ 24.0 4 flexural strength / Mpa 28d ≥ 8.0 5 bending than ≤ 3.0 6 bond strength / Mpa 7d ≥ 1.0 28d ≥ 1.2 7 alkali resistance: Saturated Ca (OH) 2 solution, 168h without cracking, spalling 8 heat resistance: 100 ° C water, 5h without cracking, spalling Frost resistance - freeze-thaw cycle: (-15 ° C ~ +20 ° C), 25 times no cracking, spalling Shrinkage /% 28d ≤ 0.15 a setting time of the project can be adjusted according to user needs and seasonal changes. Acid and alkali resistance Corrosive medium, the name of the solution concentration of corrosion PH = 2 soaked in a year with no loss, no leakage 2% soaked in a year with no loss, no leakage 10% soaked in a year with no loss, no leakage Soaked in a saturated solution of one year with no loss, no leakage How to use: ◆ Primary treatment: A grass-roots level surface should be clean and free of dust, oil, chemical corrosion medium residues. The surface of the porous material should be pre-dampened with water, steel primary surface rust should be removed. 2, the leak must first use the rapid sealing agent, it is best to keep the base surface moist to Mingshui is a standard in order to achieve better water effects. ◆ Material preparation: 1, the first glue into the bucket, and then follow the glue: powder = 1:4 ratio, stirring while slowly adding powder and stir until evenly without caking glue-like. 2, mechanical stirring or manual mixing, the preparation of a good glue should be used up within 2-3 hours. ◆ for the waterproof layer and moisture corrosion protection layer construction and maintenance. 1, with a spatula to stir the good glue evenly on the base scratch 2-3 times, each again time interval of 2-4 hours, hand-touch non-stick prevail. 2, in order to avoid the eye of a needle, the construction follows the facade before the flat and horizontal and vertical compatibility principle, the construction of at least scratch twice, in order to avoid leakage scraping leakage coated to ensure that the waterproofing effect. 3, coating drying time and ambient temperature, air relative humidity factors, after drying the coated surface drain scraping leakage Tu phenomenon occurs when tiny cracks or construction, just fill in defects using this product scratch Coating repair namely can. For Paving brick panels and other decorative materials should be waterproof glue to dry thoroughly, usually after 72 hours. 5, the reference amount of about 1.50-2.00kg / ㎡. The dosage is only a reference to the amount, we strive to the data to ensure practicable in the appropriate application environments, and different amount based on the use of the environment, there will be a corresponding increase or decrease. ◆ to paste decorative brick, both flexible, waterproof, anti-corrosive effect of construction and maintenance. 1, decorative tile surface should be clean, and dried should be soaked in water. 2, the preparation of a good waterproof mortar evenly in the Decorative Tile surface, the paste layer thickness 3.0-5.0mm appropriate, and then bonded at the grassroots level, alignment, compaction. 3, room temperature curing 24-48h can be achieved by the ideal strength, the highest strength in seven days. 4, the reference amount of about 4.00-5.00kg / ㎡. We strive to the data to ensure practicable in the appropriate application environments, and different amount based on the use of the environment will be a corresponding increase or decrease. Note ◆ The product construction ambient temperature 10-30 ° C, and should not be less than 5 ° C, raw materials shall not be exposed to moisture, rain, sun and debris contamination. ◆ This product is not recommended in rainy days, frozen construction. If it is necessary to construction in the winter, you should take the necessary freezing measures. ◆ The product should be with the mix with the use of non-first spices too many spices and each should be used up in 2-3 hours. Safety Precautions ◆ construction required to wear gloves and goggles. In case of skin or eyes, immediately rinse with water. If inflammation of the phenomenon, to be timely medical treatment. ◆ powder operations to be very careful in order to reduce dust formation. If the dust is too much to wear visible mask. Packaging and storing ◆ This product should be stored in dry and ventilated place above 0 ° C to avoid exposure, rain forest, damp, cold glue unopened shelf life of six months, powder unopened shelf life of 12 months. ◆ Engineering packing: glue Packing Specification 10 kg / barrel, the powder packing specification is 40 kg / bag. ◆ retail packaging: 20 kg / barrel. |
Admin>>>
You are the 7818 visitor
Copyright © GuangDong ICP No. 10089450, Beijing gold solid source of new technology Special Engineering Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 7818 visitor
Copyright © GuangDong ICP No. 10089450, Beijing gold solid source of new technology Special Engineering Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility